PRODUCT: ArmorChem 2500 Gray Primer
PRODUCT NUMBER: AD-24840A / 41Z-392
OBJECT FINISHED: Structural and Joist Steel
WEIGHT/GALLONS :11.5 +/- .15
RECOMMENDED REDUCTION: None
VISCOSITY: 17"-19" Zahn #2 Signature Cup, 78 Deg.F.
REDUCER: Mineral Spirits
GRIND: 5+/-Hegman
REDUCED VISCOSITY : Use as Supplied
WEIGHT SOLIDS: 70.0+/- 1.0%
RECOMMENDED FILM THICKNESS
WET: 1.8 - 2.2 mils, DRY: 1.0 - 1.2 mils
VOC: 3.33 lbs./gal
VOLUME SOLIDS: 47.0+/-0.5%
FLASH TIME: Dust free - 45'
COVERAGE :800 sq.ft./gal @ 0.9 dry mils, 100% efficiency
BAKE TIME : Tack free - 2hrs, Thorough dry - 24 hrs
SUBSTRATE PREP. : SPC #2 Hand tool cleaning to remove all loose mill scale, rust, and other detrimental matter.
BAKE TEMPERATURE: Air Dry
APPLICATION METHOD: Dip or Spray
WELD THROUGH: ArmorChem 2500 Gray Primer can be welded through to yield sound welds
EQUIPMENT SETTINGS : For Air Spray: Binks Model 10 Spray Gun with #66 fluid nozzle and air cap. Use 50-70 pounds of air pressure.
GLOSS: 1- 10 Degrees (60 Deg)
APPLIED OVER: Clean Steel
HARDNESS: B pencil
USED UNDER : Alkyd, 1 part Urethane, 1 part epoxy topcoats
IMPACT RESISTANCE: 20 In-lbs.
REMARKS:
ArmorChem 2500 Gray Primer was formulated as a lead and chrome free gray shop primer to meet requirements of the Steel Structures Paint Council, Paint Specification #15, Steel Joist Shop Paint, Type I. Panels painted with one coat of this primer withstood 150 hrs. exposure to 5% salt spray tested with accordance with ASTM B 117-73. Read Material Safety Data Sheet before using.
Please click link below to request most current This e-mail address is being protected from spambots. You need JavaScript enabled to view it of ArmorChem 2500 Gray Primer:
This e-mail address is being protected from spambots. You need JavaScript enabled to view it
